RIFF JTAG – CDMA Samsung B159 Boot repair supported

06.04.2011   CDMA Samsung B159 Boot repair supported
Resurrecting Samsung B159 is simple. Board is auto powered on when battery is inserted and USB cable is connected.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0x57FFFF).
To resurrect Samsung B159:

• Solder JTAG cable to Samsung B159 JTAG pads;
• Connect ignition cable for auto power on or use battery;
• Make sure Samsung B159 is selected in the list of models;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.