RIFF JTAG – CDMA Haier C2040 Repair supported

22.04.2011  CDMA Haier C2040 Repair supported
Resurrecting Haier C2040 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0x257E
To resurrect Haier C2040:

• Solder JTAG cable to Haier C2040 JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure Haier C2040 is selected in the list of models;
• Click Resurrect button;
• Choose which areas to flash;
• Wait till software signals a successful operation completion;
• De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.