RIFF JTAG – CDMA Haier C3010, LG LSP450T Repair supported

22.04.2011  CDMA Haier C3010, LG LSP450T Repair supported
Resurrecting Haier C3010 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chips with IDs 0x00EC/0x257E and 0x017E/0×2210. Proper data will be selected automatically depending on memory ID in your device.
To resurrect Haier C3010:

• Solder JTAG cable to Haier C3010 JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure Haier C3010 is selected in the list of models;
• Click Resurrect button;
• Choose which areas to flash;
• Wait till software signals a successful operation completion;
• De-solder JTAG wires;

Resurrecting LG LSP450T is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0×0020/0×8867
To resurrect LG LSP450T:

• Solder JTAG cable to LG LSP450T JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure LG LSP450T is selected in the list of models;
• Click Resurrect button;
• Choose which areas to flash;
• Wait till software signals a successful operation completion;
• De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.