RIFF JTAG – CDMA ZTE C370 Repair supported

22.04.2011  CDMA ZTE C370 Repair supported
Resurrecting ZTE C370 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0×0098/0×0096
To resurrect ZTE C370:

• Solder JTAG cable to ZTE C370 JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure ZTE C370 is selected in the list of models;
• Click Resurrect button;
• Choose which areas to flash;
• Wait till software signals a successful operation completion;
• De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.