Resurrecting HTC Click is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside.
There are two different hardware versions exist – one based on the MSM7225 chipset (CLIC10000) and other – on the ESM7225 chipset (CLIC11000). In resurrector settings you can select a desired version.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.52.0001 SPL version.
As well, you can change CID – for this make sure ‘Repair Custom ID’ field is checked in the Resurrection Guide dialog.
To resurrect HTC Click:
- Solder JTAG cable to HTC Click JTAG pads;
- Make sure HTC Click is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
To Unlock HTC Click :
- Solder JTAG cable to HTC Click JTAG pads;
- Make sure HTC Click is selected in the list of models;
- Click Resurrect button;
- Select “Unlock Settings” TAB
- Select Unlock method
- Click “Unlock”
Tidak ada komentar:
Posting Komentar